Bathrooms and kitchens are the areas most homeowners wish to change from time to time. Unfortunately, both projects tend to be expensive. However, bathroom remodeling costs can be controlled. It is easier to implement cost-saving measures because the bathroom is a comparatively smaller place. Below are some cost-saving remodeling ideas for the bathroom.
Table of Contents
Keep the Fixtures in the Same Place
Plumbing is where you spend a lot of money renovating your bathroom. Tiling Sydney suggests keeping the bathtub, vanity, shower, or toilet seat in the same place will save a lot of money. Much effort is involved in fixture relocation (particularly the toilet). If the bathroom is pretty functional with the current location of the fixtures, there is not much need to change them. That’s why it’s essential to work with a reliable and experienced company that can help you make the most of your budget. If you’re looking to remodel your kitchen in Los Altos, it’s essential to work with a company that has experience in that area. Visit this website to remodel your kitchen in Los Altos so they can provide valuable insights and help you to achieve your desired outcome.
DIY a Vanity
Do you want to save money on bathroom relocation? Hit up the antique stores, flea markets, and re-sellers. Ask them for the lovely old dresser you can spruce up and use again in the place of the old bathroom vanity. It makes for a good do-it-yourself project. Thus you can cut out the space to hide seal drawers and towel bars. Now you can put a sink in it or on it. Finally, you can try installing a vanity sink.
Cosmetic renovation
If the budget is tight, you can go for a cosmetic renovation. For a few thousand dollars, you can change the look of your washroom by doing some simple tasks. For instance, put a new coat of paint on the wall and the ceiling. Rejuvenate the countertop on your vanity. Apply a new faucet to the sink. Update the light fixture and vinyl plank on the floor. Now your bathroom will look like a new one. In addition to these, pick out a fresh new shower curtain, and the whole get-up of the bathroom will change.
Install a Prefabricated Shower or Bathtub
Tearing out the old prefabricated shower base and replacing it with custom tiles and walls will be expensive. Tiling Sydney suggests you consider using a pre-formed one-piece shower stall rather than a new tiled shower. It will be cost-saving. You won’t be hiring some costly tile setters. Prefabricated shower stalls go up in hours. Tile showers take some days. Alternatively, you can start with a prefabricated shower base and tile walls. Tile materials are way cheaper than a one-piece stall. It’s the labor where your most expense goes.
Keep the Electrical Items in Place
Tiling Sydney understands that bathrooms usually need wiring upgrades while remodeling. The old existing wiring does not meet current electrical code standards. If a bathroom’s wiring is functional, contact the local permitting office. They may tell if the system can be grandfathered in. If it needs some changes, do that. One typical replacement is renewing non-grounded outlets with the ground-fault current interrupter outlets.
Final Words
A bathroom renovation is not a very easy job. But, with some ideas like the above, it’s not that hard either. You can apply some unique techniques of your own. Anything that adds to the beauty of the place would be a welcome step. Get your renewal done, and enjoy a fresh shower there.