An inverter is a piece of equipment that keeps our household appliances up and running during a power cut. Even then, considering the fact that it’s also an electrical appliance in itself there are times when it may not function as effectively as you would want it to or have face hiccups time and again.
There are a few common problems that is faced by each inverter owner, and it’s great to know how to work around those glitches so that you are never short on power, and your inverter can keep going on for years to come.
Source: Luminous
Inverter Not Turning Up
This is perhaps the most common issue that most of us have or will face at some point in time. If you happen to find yourself in such a problem, there are a couple of things you can do to figure out what’s wrong:
- Check if any wires are tripped
- Check to see if the battery is disconnected
- Look out for Loose terminals
- See if the battery is weak or discharged
- Check to see if the battery terminals are reversed
If you find that the power switch is defective, it’s time to send it to the repair centre. In case of a faulty battery, you would need a replacement; however, in case the inverter’s tripped, press the trip reset button to fix the issue. For loose terminals, make sure to check for corrosion and clean them thoroughly before you clamp them again.
Battery’s Not Charging
This is another commonly occurring issue. This could be happening due to a number of reasons like, burnt rectifiers, melt fuse, or a bad connection. If this is the case, you can either check the battery for corrosion or call-in professionals to examine the underlying cause.
Short Battery Life
This is one more issue that plagues inverter owner’s time and again. If this is true in your case, then chances are that you are consuming more power than your system is capable of delivering; therefore, removing the extra load can help you easily solve this issue. However, if that’s not the case, then check if your battery has enough electrolyte, if it’s low, top it up with distilled water on a regular basis.
Power Inverter Working in Just the Inverter Mode
If you witness such an issue, then you should check the power cable and replace the fuse. However, in case the input protector is being effective, reset it. The input protector is a safety feature that protects the inverter from high voltage.
Continuously Beeping Alarm
There are times when the inverter tends to beep continuously. If that happens, it could be because the inverter is overloaded, or the cooling fan is stuck. To fix this issue, disconnect all of the extra load. If the problem persists, it’s time to send it to the repair centre as the underlying issue needs to be addressed soon enough so as to not cause any further damage to the inverter.
False Codes on LED
This is a common issue with a lot of inverter owners where the LCD starts displaying false codes. If that happens, it could be because of an internal issue, and the inverter circuit might need a replacement. However, if the problem instead seems to be external, then you would need to check the battery cables, output and input wires, etc., to make sure everything is alright.
If you are thinking of buying an inverter and would rather avoid such issues, then an inverter by Luminous would do you much good, as they come with the highest quality-built standards and are renowned for their faultless service life with a low cost of ownership. So, if you really want to invest your money at the right place, then don’t forget to check out Luminous’ stellar range of inverters available across a wide range of style, power and budget options.