Are you looking for a creative way to show off your favorite shoes? Installing a shoe wall display is the perfect solution. In this blog post, we will walk you through installing a shoe wall display, from choosing the correct display to the final installation.
Table of Contents
Planning Your Shoe Wall Display
The first step is to decide how big you want your shoe wall display to be. Measure the wall space you’ll use and decide how many shelves you want to install. If you want to hang your shoes on hooks or brackets, factor that into your measurements.
Next, decide what materials you’ll use for your shelves. You can use a variety of materials, such as wood, metal, or plastic, depending on the look you’re going for. Consider the weight of the material when making your decision, as some materials may be too heavy for the wall you’re working with.
Make sure to have all the necessary tools, such as a saw, drill, measuring tape, and level, before you begin.
Measuring and Cutting the Shelves
Once you have your wall display design planned out, it’s time to get started on the actual construction.
Begin by measuring and writing down the wall space where you intend to install your shoe wall display. Next, measure the shelves and cut them to fit the width and length of the wall area you have measured. Make sure to use a saw or power tool appropriate for the material you are working with.
Consider any hardware (such as screws, nails, or brackets) that you’ll be using to attach the shelves to the wall when you’re cutting the shelves. Pre-drill holes or make other modifications as necessary to make room for these hardware pieces.
Assembling the Shelves
Begin by positioning the two pieces together and securing them with the screws. Use the drill to drive in the screws until they are tight. Be sure to use caution when drilling so as not to overtighten the screws.
Next, you’ll need to connect the front and back supports to the sides. Secure them with screws, using the drill as before. You may need an adjustable wrench to tighten the screws if they are too tight for the drill to handle.
Finally, connect the top shelf to the sides by lining up the pre-drilled holes in the top shelf with those on the sides. Use the screws to secure them together. Make sure not to overtighten the screws.
Hanging the Shelves
Decide where to place the shelves on the wall. Make sure the area on the wall where you intend to hang them is level and evenly spaced by taking measurements.
You will then need to mark the wall with a pencil, so you can see where the shelves should go. Use a leveler to make sure the shelves are all even. Once the marks are made on the wall, you can use a drill to make holes. Finally, attach your shelves to the anchors by using screws that are slightly longer than the thickness of the shelf. You may need to use a drill to make the screws fit better.
Adding the Shoes
Once the shelves are hung and you’ve created the perfect shoe wall display, it’s time to add the shoes! When choosing the shoes to put on your wall, make sure to select pieces that will complement each other, both in style and color. Start by placing the more oversized, bulkier shoes first. Then add the smaller, lighter-weight styles. You may want to add a few accessories like scarves or belts to the wall as well.
Conclusion
Installing a shoe wall display will not only add a touch of style to your home or business
but also allows you to access and store your favorite footwear easily. However, make sure all of the shoes are secured tightly in the shoe wall display.