Are you a skater? Do you love learning skateboarding? Then, you might be collecting its replicas, i.e., fingerboards. But you keep them at your home with no modifications – the same as you get them from the brand. Don’t you know that you can customize the fingerboard? The custom fingerboard looks terrific!
You can buy and customize the fingerboard on your own or buy a fingerboard with cool-looking fingerboard trucks, decks, etc., from a renowned brand. However, being a beginner, things could be difficult.
If you are a beginner, keep reading this article, as it contains all the information you need to learn about fingerboard customization.
Table of Contents
How to Customize a Fingerboard (DIY)?
Making your ordinary fingerboard a new cool-looking customized one could be hard for some. However, with a good guide, it becomes a cakewalk. So, if you are interested in customizing your fingerboard, go through the below-listed points.
Customize Grip Tape
You can customize the grip tape of your fingerboard and make it look fantastic. The steps to customizing the grip tape are as follows: –
- First, you need to get a permanent marker for the project.
- Locate the logo of the fingerboard.
- Now, start dotting it with the permanent marker.
- You don’t need to color it; dot it.
- Keep dotting until the logo disappears.
- It looks incredible now!
Redesign the Board
Make your professional fingerboard look cool by redesigning its board. Do you know how to do it? Here are the steps: –
- Take off the fingerboard wheels, trucks, and decks. It will make the operation easy!
- Get sandpaper, and scratch off the graphic from the bottom of the board.
- Now, you need permanent markers of different colors. If you have them, you’re good to go; otherwise, buy them from the market.
- Start making your desired graphic; for instance, you can draw stripes, fireworks, etc.
- You can also color the bottom, dot the logo with a marker, or cut a line on the grip tape.
Do you know how to cut a line on the grip tape? Here’s how you will do it.
Cut a Line on the Grip Tape
To cut a line on the grip of your professional fingerboard, follow the below-mentioned steps:-
- Get a scissor or a sharp knife.
- Find the two pairs of bolts on any end of the board.
- Place your knife/scissor an inch closer to the middle of the board.
- Do a vertical cut of about a third of the width of your fingernail on this area.
- Ensure you cut the space vertically and that there’s no tape left.
- It looks fantastic, and you can color the line with a permanent marker to enhance its beauty.
Increase Your Kicks
Increasing your kicks is the most awesome customization you can make in your fingerboard. Follow the below-listed steps to improve the kicks in your fingerboard.
- Soak the board of your professional fingerboard in hot water for at least 20 mins.
- After that, try bending the kicks of your fingerboard and do it slowly.
- Once the board bends a little, soak the board in cold water for about 15-20 mins.
Pro Tip: Do not wildly bend the board, as it may look fake while you do ollie in front of your fingerboard buddies.
Final Verdict
To make your fingerboard stand out from the crowd, customize it. Indeed, a custom fingerboard looks impressive, but do you know you can customize your fingerboard at your home? Yes, you can do it; the steps are mentioned above. However, if you’re short on time, you can buy a customized fingerboard with unique graphics or your picture.
You can select between 34mm fingerboard trucks and 32mm fingerboard trucks and the type of premium fingerboard deck you need. Though only some stores have options to customize your fingerboard, xflippro is a website that gives you this option.
Hopefully, this article provides you with enough information on fingerboard customization. For more such articles, stay tuned with us!