If you use outrigger crane pads, then you should have the correct outrigger pad setup for your equipment. These pads should not span visible voids and they should be placed in the center of the outrigger. They can also be used on other equipment that has an elevated point of contact with the ground. By following the proper set up, you can protect yourself from costly equipment damage. NBIS offers insurance for heavy haul and cranes, as well as concrete pumping.
While outrigger pads are extremely versatile, they should be crafted to prevent voids from forming. In addition, the pad must be strong enough to resist bending and return to its original shape after a bending. Outrigger pads are recommended for optimum maneuverability and load bearing capacity. However, the capacity of the pads will vary depending on the surface, ground conditions, and the manufacturer’s tolerance for sizing.
Outrigger pads are available in a variety of shapes and sizes, and are designed to accommodate the different weights and heights of the crane. Large square outrigger pads can be cumbersome to move around, while round outrigger pads can be easily rolled into position. The material of outrigger pads also varies, depending on the duty. Outrigger pads should be durable and resistant to liquids, chemicals, and other substances.
Checkers outrigger pads are made from high-density polyethylene (HDP), which means that they won’t crack, splinter, or absorb water. They are also highly resistant to moisture, oil, and chemical exposure. In addition, they are non-conductive, making them a great choice for heavy equipment environments. The best part about these products is that they are made from 100% recycled polyethylene. Moreover, they do not contain harmful substances like asbestos and other chemicals.
Choosing outrigger pads is a complex task. You should always seek the advice of a professional before purchasing one. The manufacturer of the outrigger pads should have sufficient knowledge and experience in the field. If you’re unsure, consider purchasing DICA outrigger pads from Utility Products. Get outrigger pads for cranes from Prime Tech Pads. They sell high-quality DICA outrigger pads and are recommended by many. If you’re not sure, read the Equipment Showcase e-newsletter to learn more about the product’s advantages.
The purpose of outrigger pads is to distribute the weight of the heavy machinery and provide a more stable surface than the ground. Because outrigger cranes are so heavy, the slightest change can compromise the structural integrity of the equipment. It’s important to choose the right pad because small movements at the base of the crane equate to large movements at the peak. If you don’t use outrigger pads, you may be in danger of damaging the ground.
Xinxing offers high-quality outrigger pads. They are ISO 9001:2008 certified and have over 30 years of experience in plastics manufacturing. In addition to providing quality products, Xinxing also provides top-notch service. They have engineers on staff to answer any questions you may have about the product. A comprehensive selection of quality outrigger pads can help you protect your crane and the ecosystem around it.
When compared to wood outrigger pads, synthetic outrigger pads have a better defense against moisture and chemicals. Wood absorbs moisture and takes on extra weight, which makes it vulnerable to breaking under stress. Wood, on the other hand, expands when wet, resulting in a weakened pad. While outrigger pads are designed to absorb excess moisture, they are not as durable as UHMW outrigger pads.
Before setting up an outrigger crane, inspect the ground surface and its surroundings for any signs of failure. Use the roll or plate proof test to check for adequate support. If excessive settlement is found, consider a different location or add additional matting to reduce the ground bearing pressure. If all else fails, it is time to call in a professional. This is your only chance to avoid disaster. If you don’t want to risk your crane’s safety.